BKTHD - SILICONE CONCRETE & MORTAR SEALANT
- MSDS: BKTHD
- Manufacturer: MACKLANBURG DUNCAN
- Product Name: SILICONE CONCRETE & MORTAR SEALANT
- National Stock Number: 8030-00F016762
Product Identification
Product ID:SILICONE CONCRETE & MORTAR SEALANT
MSDS Date:07/20/1989
FSC:8030
NIIN:00F016762
MSDS Number: BKTHD
Responsible Party
OKLAHOMA CITY, OK 73118
Emergency Phone: (405) 528-4411
Info Phone: (405) 528-4411
Cage: 82464
Contractor
Telephone: 800-654-8454 / 405-528-4411
Cage: 82464
Ingredients
POLYSILOXANE
CAS: 70131-67-8
Fraction By Weight: 45%
METALLIC CHELATE
Fraction By Weight: 5%
METHYL-TRIS-(METHYL ETHYL KETOXIMO) SILANE, 2-BUTANONE,
CAS: 22984-54-9
Fraction By Weight: 5%
Hazards
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:SKIN/INGESTION: IRRITATION. EYES:
IRRITATION, TEARING, & BURNING. INHALATION: COUGHING & RESPIRATORY
TRACT IRRITATION.
Explanation of Carcinogenicity:NONE
Effects of Overexposure:SKIN/INGESTION: IRRITATION. EYES: IRRITATION,
TEARING, & BURNING. INHALATION: COUGHING & RESPIRATORY TRACT
IRRITATION.
First Aid
First Aid:INHALATION: REMOVE TO FRESH AIR. TREAT SYMPTOMATICALLY.
INGESTION: DON'T INDUCE VOMITING. EYES/SKIN: FLUSH W/WATER FOR 15
MINS. OBTAIN MEDICAL ATTENTION IN ALL CASES.
Fire Fighting
Flash Point Method:CC
Flash Point:111F
Extinguishing Media:CO2, FOAM, DRY CHEMICAL. DO NOT USE WATER.
Fire Fighting Procedures:USE SELF-CONTAINED BREATHING APPARATUS IN
POSITIVE PRESSURE MODE & FULL PROTECTIVE GEAR. DON'T USE WATER.
Unusual Fire/Explosion Hazard:IRRITATING OR TOXIC GASES & AEROSOLS MAY
BE PRODUCED DURING BURNING.
Accidental Release
Spill Release Procedures:SCRAPE INTO CONTAINERS.
Handling
Handling and Storage Precautions:DON'T STORE NEAR HEAT SOURCES, SPARKS,
OR FLAME. STORE 40-120F. DON'T FREEZE OR INGEST. USE IN WELL
VENTILATED AREAS.
Other Precautions:KEEP AWAY FROM CHILDREN. AVOID CONTACT W/SKIN.
Exposure Controls
Ventilation:PROVIDE ADEQUATE LOCAL EXHAUST VENTILATION TO KEEP
Work Hygienic Practices:WASH SKIN & HANDS AFTER USE.
Supplemental Safety and Health
Chemical Properties
Boiling Pt:B.P. Text:590F
Melt/Freeze Pt:M.P/F.P Text:8.6F
Vapor Pres:<2
Vapor Density:>AIR
Spec Gravity:1.16
Evaporation Rate & Reference:SLOWER THAN BU AC
Solubility in Water:INSOLUBLE
Appearance and Odor:LIGHT GRAY SEMI-SOLID W/SLIGHT SWEET ODOR IN
UNCURED STATE.
Stability
Stability Indicator/Materials to Avoid:YES
WATER
Stability Condition to Avoid:HEAT SOURCES, SPARKS, FLAME, TEMPERATURES
<40F OR >120F, & FREEZING.
Hazardous Decomposition Products:CO, CO2, SILICON DIOXIDE.
Disposal
Waste Disposal Methods:DISPOSE IN SANITARY LANDFILL IN ACCORDANCE
W/LOCAL, STATE, & FEDERAL REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.